Setting The Output Video Standard; Selecting Whether Module Will Be Controlled From The Local Controls Or Through The; Tm Interface; On Screen Menus - evertz 7700 Manual

Hd upconverter
Hide thumbs Also See for 7700:
Table of Contents

Advertisement

5.1.

SETTING THE OUTPUT VIDEO STANDARD

DIP switches 1 to 4 set the output video standard.
DIP 1
On
Off
On
On
5.2.
SELECTING WHETHER MODULE WILL BE CONTROLLED FROM THE
LOCAL CONTROLS OR THROUGH THE VISTALINK
DIP switch 8 selects whether the module will be controlled from the local user controls or through the
TM
VistaLINK
interface.
DIP 8
Off
On
6.

ON SCREEN MENUS

6.1.

NAVIGATING THE ON SCREEN MENU SYSTEM

A toggle switch and pushbutton allow card edge navigation of a set of on-screen menus used to configure
the card. To enter the on-screen menu system, hold the toggle switch in the up or down position and then
press and hold the pushbutton for 3 seconds. This will bring you to the main Setup menu where you can
use the toggle switch to move up and down the list of available sub menus. An arrow (
down the left hand side of the menu items to indicate which item you are currently choosing. Once the
arrow is on the desired item, press the pushbutton to select the next menu level.
On all menus, there are two extra selectable items: Back and Exit. Selecting Back will take you to the
previous menu (the one that was used to get into the current menu) while Exit will return the display to its
normal operating mode. On the main menu, BACK and EXIT will both take you to the normal operating
mode.
Once in a sub menu, there may be another menu layer, or there may be a list of parameters to adjust. If
there is another set of menu choices, use the toggle switch to select the desired menu item and press the
pushbutton.
DIP 2
DIP 3
DIP 4
Off
Off
On
Off
Off
On
Off
On

Table 5: Output Video Switch Settings

VistaLINK™ CONTROL
The card functions are controlled through the local menus
The card functions are controlled through the VistaLINK
interface. (See section 8)
Table 6: VistaLINK™ Control Switch Settings
Revision 1.3
OUTPUT VIDEO FORMAT
Off
1080i/59.94
Off
1080i/50
Off
720p/59.94
On
720p/50
TM
INTERFACE
7700 MultiFrame Manual
7710UC-HD HD UpConverter
TM
) moves up and
7710UC-HD-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

7710uc-hd

Table of Contents