Table of Contents
Advertisement
4.2.2. Displaying the Software Version
Software operating on the 7707EO-3G has a version number associated with it. This version number can
be indicated to the display. By this means, it can be verified that the module is operating with the most
recent software. To reveal the software version, select the STAT (Status) menu item in menu level 1,
followed by the VER (Software Version) menu item.
STAT
VER
VER x.x BUILD xxx
4.2.3. Selecting the Output Video Rate
User configuration selects the video standard rate for transmission over the optical interface. If the AUTO
mode is selected, then the output video rate will match the input video rate. Otherwise, the output video
rate will be as selected, regardless of the input rate. To configure the output video rate sent across the
optical link by the 7707EO-3G, select the CTRL (Control) menu item in menu level 1, followed by the RATE
(Video Rate) menu items.
CTRL
RATE
AUTO
2970
1485
270
BYP
4.2.4. Selecting the Output Laser Enable Mode
In some applications it is desirable to have the laser output disabled while no input video signal is present.
Alternatively, it may be preferable to maintain an optical output signal, even with no input video. The
7707EO-3G supports both modes of operation. To configure the output laser enable mode, select the
CTRL (Control) menu item in menu level 1 followed by the VOUT (Video Output) and LASR (Laser) menu
items.
CTRL
VOUT
LASR
CONT
DISC
7707EO-3G 3G/HD/SDI Re-Clocking Electrical to Optical Converter
The following describes the function of version menu item:
VER x.x BUILD xxx
The following list describes possible user selections for this menu item:
Sets the input rate to auto detect.
AUTO
Sets the input rate to 2970Mb/s.
2970
Sets the input rate to 1485Mb/s.
1485
Sets the input rate to 270Mb/s.
270
Sets the input rate to bypass mode.
BYP
The following list describes possible user selections for this menu item:
Continuous operation. Laser is always enabled, even without
CONT
valid video signal.
Discontinuous operation. Laser is disabled when no valid input
DISC
video is detected.
Revision 1.1
7700 Multi-Frame Manual
Software version. Character string scrolls
across four digit display.
Page-11
Advertisement
Table of Contents
