Saving Configurations To The User Presets; Recall Presets Via Gpis - evertz 7710ARC Series Manual

7700 MultiFrame Manual
7710ARC Series - SD Aspect Ratio Converter
There will be a slight disturbance in the operation of the card and the on-screen
display while the new preset is being recalled.

7.7.3. Saving Configurations To The User Presets

The ARC Series modules provide ten user preset areas to store the complete set of controls.
Utilities
Store Preset
user preset 1 to 10
cancel

7.7.4. Recall Presets Via GPIs

The ARC Series provides ten user preset areas, which can be recalled using one of the four GPI inputs.
There is a separate control for each input. For simplicity, only one control will be shown in the manual.
Utilities
GPI 1
Preset 10
Preset 9
Preset 8
Preset 7
Preset 6
Preset 5
Preset 4
Preset 3
Preset 2
Preset 1
No action
GPI settings are also stored in the User Presets in addition to the other settings. If
the GPI settings are not the same for each video input and output combination,
unexpected results may occur. Ensure GPI settings are the same for each User
Preset. Before you attempt to recall presets using the GPIs.
7710ARC-42
This control is used to store the current card configuration into one of
the user presets.
Use the toggle switch to select the preset location where you want to
store the module configuration. After selecting the preset, you must
press the pushbutton before the store will take place. You can abort
the operation by pressing the pushbutton when Cancel is displayed.
This control is used to set which preset will be recalled when the GPI 1
input is closed to ground. To disable the GPI 1 input set it to no action.
See sections 2.2 and 8.3 for more information on how to activate a GPI.
Revision 1.1