7700 MultiFrame Manual
7710ARC Series - SD Aspect Ratio Converter
7.6.4. Setting the Detail Noise Floor
Image Enhancement
Detail Noise Floor
2
0 to 15
7.6.5. Setting the Enhancement Limit
Image Enhancement
Enhancement Limit
44
0 to 63
7.6.6. Setting the Horizontal Band
Image Enhancement
Horizontal Band
15
0, 5, 10, 15, 20
7.6.7. Setting the V Enhancement
Image Enhancement
Vertical Intensity
25%
0-100%
7710ARC-40
This control provides the ability to set the Detail Noise Floor.
When the image detail has a value that is below this floor it will be
deemed to consist mostly of noise. As such, the pixel associated with
that detail level will be left untouched.
This control selects the largest detail value to be added back into the
signal.
Detail that has a value larger than this value will be clipped.
This control selects the horizontal frequency band to be enhanced.
Where 0 selects the lowest frequency band available and 20 the
highest.
This control selects the intensity of the vertical enhancement process,
as a ratio of the horizontal enhancement.
The range is 0 to 100% in increments of 25%, where 0% refers to no
vertical enhancement and 100% provides a vertical intensity that is
equivalent to the horizontal.
Revision 1.1