Table of Contents
Advertisement
Input V Stop
Output H Start
Output H Stop
Output V Start
Output V Stop
Status Window
Recall Preset
Store Preset
GPI 1, 2, 3, 4
9.4.
VistaLINK
TRAPS
®
The following traps can be relayed to the VistaLINK
Parameter
Program Video Missing
Fill Video Missing
Local Fault
Ext GL Missing
Ext GL Valid
AFD Missing
Pan Scan Missing
Program Video Standard Changed
Fill Video Standard Changed
Firmware Upgrade
Factory Reset
Ext GL Video Standard Changed
The Input V Stop defines the vertical portion of the input image to
process to the output.
The Output H Start defines how to scale the cropped input image
horizontally and where to place it horizontally on the output raster.
The Output H Stop defines how to scale the cropped input image
horizontally and where to place it horizontally on the output raster.
The Output V Start defines how to scale the cropped input image
vertically and where to place it horizontally on the output raster.
The Output V stop define how to scale the cropped input image
vertically and where to place it horizontally on the output raster.
Enables or disables the status window on all the outputs.
Initiates a recall of the current card configuration from one of the user
presets or from the default preset.
Initiates a store of the current card configuration into one of the user
presets.
Sets which preset will be recalled when respective GPI input is closed
to ground.
Table 9-2: VistaLINK
®
®
Description
Alerts when the program video is missing
Alerts when the fill video is missing
Alerts when a local fault has been detected
Alerts when the external Genlock reference is missing
Alerts when the external Genlock is Valid
Alerts when AFD/Bar Data VANC packets are not detected
Alerts when Pan and Scan VANC packets are missing
Alerts when the program video standard has changed
Alerts when the fill video standard has changed
Alerts when the module is in firmware upgrade mode
Alerts when a factory reset is applied to the ARC series module
Alerts when the external Genlock reference video standard has
changed
Table 9-3: VistaLINK
Revision 1.1
7700 MultiFrame Manual
7710ARC Series - SD Aspect Ratio Converter
Controlled Parameters
interface by the ARC Series modules.
Traps Parameters
®
7710ARC-49
Advertisement
Table of Contents
