Quick Selection Of Common Conversions Using Menu Presets - evertz 7710ARC Series Manual

Sd aspect ratio converter
Table of Contents

Advertisement

7700 MultiFrame Manual
7710ARC Series - SD Aspect Ratio Converter

7.4.1.1. Quick Selection Of Common Conversions Using Menu Presets

This control is used to configure the aspect ratio conversion of the program video output using pre-defined
aspect ratios. This control will allow you to choose many of the common conversions that you will
encounter. When you select one of the quick select modes, appropriate values are automatically entered
into the Source Frame Aspect Ratio, Input Image Aspect Ratio, Destination Frame Aspect Ratio, and
Output Image Aspect Ratio menus. Minor changes can then be made to the conversion by adjusting one
or more of the appropriate menus.
ARC Control
Aspect ratio scaler mode
AR
Full raster
4:3 Side Panel to 16:9 TB Cut
13:9 Letter Box to 16:9 TB Cut
14:9 Letter Box to 16:9 TB Cut
13:9 Stretch to 16:9 TB Cut
14:9 Stretch to 16:9 TB Cut
16:9 Stretch to 16:9 TB Cut
13:9 Stretch to 4:3 Side Panel
14:9 Stretch to 4:3 Side Panel
16:9 Stretch to 4:3 Side Panel
4:3 to 4:3 Side Panel on 16:9
4:3 to 13:9 Stretch on 16:9
4:3 to 14:9 Stretch on 16:9
4:3 to 16:9 Stretch on 16:9
4:3 to 13:9 Crop on 16:9
4:3 to 14:9 Crop on 16:9
4:3 to 16:9 Crop on 16:9
16:9 to 16:9 Letter Box on 4:3
16:9 to 14:9 Letter Box on 4:3
16:9 to 13:9 Letter Box on 4:3
16:9 to 4:3 Side Cut on 4:3
16:9 to 4:3 Squeeze on 4:3
16:9 Postage Stamp to 16:9
4:3 Postage Stamp to 4:3
Cancel
7710ARC-24
Full Raster
- converts the full input raster to full output
raster. If the input and output aspect ratios are not
equivalent there will be aspect distortion.
These settings convert the input picture to 16:9 top and
bottom cuts.
These settings squeeze common stretched input video back
to 4:3 side panel (pillar box) images on a 16:9 aspect raster.
These settings are used for converting 4:3 aspect ratio
images to common 16:9 formats.
These settings are used for converting 16:9 aspect ratio
images to common 4:3 formats.
These settings are used for converting postage stamp
images to 4:3 or 16:9 formats.
Returns up one menu level without making any changes.
Revision 1.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7700

Table of Contents