Set The Aspect Ratio Of The Output Image; Set Custom Aspect Ratios Of The Output Image; Set The Aspect Ratio Of The Destination Frame; Set Custom Aspect Ratios Of The Destination Frame - evertz 7710ARC Series Manual

7700 MultiFrame Manual
7710ARC Series - SD Aspect Ratio Converter

7.4.1.12. Set The Aspect Ratio Of The Output Image

ARC Control
Aspect ratio scaler mode
Output image aspect
output video
input image
custom
16:9
14:9
13:9
4:3

7.4.1.13. Set Custom Aspect Ratios Of The Output Image

ARC Control
Aspect ratio scaler mode
Output image custom
aspect
1.78
1.00 to 3.00
To apply the Output image custom aspect control, the Output image aspect control
needs to be set to custom (refer to section 7.4.1.12).

7.4.1.14. Set The Aspect Ratio Of The Destination Frame

ARC Control
Aspect ratio scaler mode
Dest. frame aspect
output video
custom
16:9
14:9
13:9
4:3

7.4.1.15. Set Custom Aspect Ratios Of The Destination Frame

ARC Control
Aspect ratio scaler mode
Dest. frame custom
aspect
1.78
1.00 to 3.00
To apply the Dest. frame custom aspect control, the Dest. frame aspect control
needs to be set to custom (refer to section 7.4.1.14).
7710ARC-28
This control selects the aspect ratio of the image area of the output
video. See section 6.2.1.2 for a complete discussion of image aspect
ratio.
Aspect ratio is the same as the output video standard
Aspect ratio is the same as the input image aspect ratio
Aspect ratio set by value in Output image custom aspect control
Aspect ratio is 16:9
Aspect ratio is 14:9
Aspect ratio is 13:9
Aspect ratio is 4:3
This control is used to specify a non-standard output image aspect
ratio.
The range of this parameter is 1.00 to 3.00 and adjusted in 0.01
increments.
This control selects the aspect ratio of the destination frame (production
aperture) on the program video output. See section 6.2.1.2 for a
complete discussion of destination frame aspect ratio.
Aspect ratio is the same as the output video standard.
Aspect ratio set by value in Dest. frame custom aspect control.
Aspect ratio is 16:9
Aspect ratio is 14:9
Aspect ratio is 13:9
Aspect ratio is 4:3
This control is used to specify a non-standard destination frame aspect
ratio.
The range of this parameter is 1.00 to 3.00 and adjusted in 0.01
increments.
Revision 1.1