Set The Aspect Ratio Of The Input Image; Set Custom Aspect Ratios Of The Input Image; Set The Aspect Ratio Of The Source Frame; Set Custom Aspect Ratios Of The Source Frame - evertz 7710ARC Series Manual

7.4.1.2. Set The Aspect Ratio Of The Input Image

ARC Control
Aspect ratio scaler mode
Input image aspect
WSS
SMPTE 2016
input video
custom
16:9
14:9
13:9
4:3

7.4.1.3. Set Custom Aspect Ratios Of The Input Image

ARC Control
Aspect ratio scaler mode
Input image custom aspect
1.78
1.00 to 3.00
To apply the Input Image Custom Aspect control, the Input image aspect control
needs to be set to custom (refer to section 7.4.1.2).

7.4.1.4. Set The Aspect Ratio Of The Source Frame

ARC Control
Aspect ratio scaler mode
Source frame aspect
SMPTE 2016
input video
custom
16:9
14:9
13:9
4:3

7.4.1.5. Set Custom Aspect Ratios Of The Source Frame

ARC Control
Aspect ratio scaler mode
Source frame Custom
Aspect
1.78
1.00 to 3.00
To apply the Source Frame Custom Aspect control, the Source frame aspect
control needs to be set to custom (refer to section 7.4.1.4).
7710ARC Series - SD Aspect Ratio Converter
This control selects the aspect ratio of the image area of the input
video. See section 6.2.1.2 for complete discussion of image aspect
ratio.
Aspect ratio set by Wide Screen Signalling (WSS) signal.
Aspect ratio set by SMPTE 2016 (AFD) or Pan-Scan VANC packet.
Aspect ratio is the same as the input video.
Aspect ratio set by value in Input image custom aspect control
Aspect ratio is 16:9
Aspect ratio is 14:9
Aspect ratio is 13:9
Aspect ratio is 4:3
This control is used to specify a non-standard input image aspect
ratio.
The range of this parameter is 1.00 to 3.00 and adjusted in 0.01
increments.
This control selects the aspect ratio of the source frame (production
aperture) on the program video input. See section 6.2.1.2 for
complete discussion of source frame aspect ratio.
Aspect ratio set by SMPTE 2016 (AFD) or Pan-Scan VANC packet.
Aspect ratio is the same as the input video.
Aspect ratio set by value in Source frame custom aspect control
Aspect ratio is 16:9
Aspect ratio is 14:9
Aspect ratio is 13:9
Aspect ratio is 4:3
This control is used to specify a non-standard source frame aspect
ratio.
The range of this parameter is 1.00 to 3.00 and adjusted in 0.01
increments.
Revision 1.1
7700 MultiFrame Manual
7710ARC-25