Saving Configurations To The User Presets - evertz 7700 Manual

Utilities
Recall preset
Cancel
Factory
1 to 10
#
The current state of the card will be forgotten if it has not been saved to a preset
before a recall is performed.
#
There will be a slight disturbance in the operation of the card and the on-screen
display while the new preset is being recalled.

6.10.2. Saving Configurations to the User Presets

The 7712HDC modules provide ten user preset areas to store the complete set of controls from the on
screen menu.
Utilities
Store Preset
Cancel
1 to 10
This control is used to initiate a recall of the current card configuration from
one of the user presets or from the factory preset.
Use the toggle switch to select the preset you wish to recall. After selecting
the preset, you must press the pushbutton before the recall will take place.
You can abort the operation by pressing the pushbutton when Cancel is
displayed.
This control is used to initiate a store of the current card configuration into
one of the user presets
Use the toggle switch to select the preset location where you want to store
the module configuration. After selecting the preset, you must press the
pushbutton before the store will take place. You can abort the operation by
pressing the pushbutton when Cancel is displayed.
Revision 1.2
7712HDC HD Broadcast Quality Down Converter
7700 MultiFrame Manual
7712HDC-31