Table of Contents
Advertisement
5.1.5. IRIG Reader
Standard:
IRIG 200-95 Formats B002 and B122
Connector:
3 pin female XLR type connector
Level:
0.2 to 4V p-p, balanced or unbalanced
5.1.6. General Purpose Inputs and Outputs
Inputs:
6, programmable control functions
Outputs:
2, programmable tally functions
Connector:
9 pin female "D"
Type:
opto-isolated, active low
Signal Level: Pulled up to +5 volts. 3.3V DC provided
5.1.7. Serial Remote Control
Standard:
RS-232 or RS422, programmable baud rate
Connector:
9 pin female "D"
Control:
firmware upgrade, serial remote control of all functions
5.1.8. Electrical
Voltage:
Power:
Fuse Rating:
Safety:
EMI/RFI:
5.1.9. Physical
Single Power Supply version:
Dimensions:
Weight:
Dual Power Supply version:
Dimensions:
Weight:
TECHNICAL DESCRIPTION
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
autoranging 100 - 240 Volts AC, 50/60 Hz
30 VA
250 V, 1 amp, time delay
ETL Listed, complies with EU safety directives
Complies with FCC Part 15 Class A regulations
Complies with EU EMC directive
19" W x 1.75" H x 7.75" D.
(483mm W x 45mm H x 196mm D)
7 lbs. (3.2 Kg)
19" W x 1.75" H x 18.75" D.
(483mm W x 45mm H x 477mm D)
8 lbs. (3.5 Kg)
Revision 1.4.1
Page 5-2
Advertisement
Table of Contents
