Table of Contents
Advertisement
3.6.2. Selecting the Character Style
CHAR STYLE
Char white
Char white+black
Char white+bkgnd
Char black
Char black+white
Char black+bkgnd
3.6.3. Selecting whether the Frames, Fields and Symbols will be displayed on the VCG
VCG FRAMES
Vcg frames off
Vcg frames on
VCG FIELDS
Vcg fields off
Vcg fields on
OPERATION
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
The CHAR STYLE menu item is used to select whether the background
mask will be used and whether the characters will be white or black.
The on screen format menus are always white characters keyed into a
black background mask.
Select Char white to disable the background and key white characters
directly into the picture.
Select Char white + black to key white characters on a black
background mask into the picture.
Select Char white + bkgnd to key white characters on a transparent
gray background mask into the picture.
Select Char black to disable the background and key black characters
directly into the picture.
Select Char black + white to key black characters on a white
background mask into the picture.
Select Char black + bkgnd to key black characters on a transparent
white background mask into the picture.
The VCG FRAMES menu item is used to select whether the frames will
be shown when the time is displayed in the character inserter. When
the reader is set to IRIG DAY mode this menu item will control whether
the milliseconds are displayed or not.
Select Vcg frames off to hide the time code frames.
Select Vcg frames on to show the time code frames.
The VCG FIELDS menu item is used to select whether the fields will be
shown when the time is displayed in the character inserter. When the
reader is set to IRIG DAY mode this menu item will not have any effect
on the IRIG time displays.
Select Vcg fields off to hide the time code fields.
Select Vcg fields on to show the time code fields.
Revision 1.4.1
Page 3-24
Advertisement
Table of Contents
