3.1.4. An Overview of the SHIFT Key functions
When the SHIFT key is held down, the meanings of some of the keys are modified, gaining quick
access to a wider variety of functions. Following is a summary of the shifted key functions
SHIFT+SETUP
SHIFT+SELECT
RESET menu item of the Engineering Setup Menu.
SHIFT+DISPLAY
3.1.5. Panel Lock Key functions
When the DISPLAY and SHIFT keys are held down at the same time, pressing the SELECT key will
lock the front panel. All front panel keys will be disabled and the front panel will display the message
When the front panel is locked, and the DISPLAY and SHIFT keys are held down at the same time,
pressing the SELECT key will unlock the front panel. All front panel keys will be enabled to their
normal functions and the front panel will display the message
3.1.6. An Overview of the Status Indicators
There are 8 status indicators located on the front panel that show operational status of the 8010TM-
IRIG at a glance.
VITC GEN
Indicates that the VITC keyer is enabled.
COL'R
Indicates that the 8010TM-IRIG is receiving a valid colour frame reference and is
operating in the colour frame mode.
BYPASS
Indicates that 8010TM-IRIG is operating in the Bypass Mode. The SDI video input is
directly connected to the SDI Bypass output and the 8010TM-IRIG will have no effect on
the video signal.
VIDEO
Indicates that input video is present. If it is blinking, it indicates a video signal is present
but the video standard is different from the VIDEO TYPE menu setting. (See section
3.7.1 for information on selecting the video type).
OPERATION
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
Enters the Engineering Setup menu system
Resets the 8010TM-IRIG to factory defaults when you are in the FACTORY
Displays the Jam Sync Offset, and Reader and Generator event registers
Panel lock on
Panel lock off
Revision 1.4.1
Page 3-3