Reader Commands; Table 4-9: Reader Numbers - evertz 8010TM IRIG Instruction Manual

35 Sense Char Gen Frames
25 Select Char Gen Frames
36 Sense Char Gen Fields
26 Select Char Gen Fields
37 Sense Char Gen Symbols
27 Select Char Gen Symbols
4.8.

READER COMMANDS

Several of the Reader commands need to specify which Reader they apply to. This parameter is called
the Reader Number.
61 Sense RDR Mode
41 Select RDR Mode
Reader modes set according to the following values.
SERIAL PROTOCOL
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
1 byte
1 byte
1 byte
RDR NO
00
01

Table 4-9: Reader Numbers

Rdr No
Rdr No
+ 1 byte
Revision 1.4.1
Returns 1 byte as defined below.
Selects whether the frames digits
will be shown on the character
inserter.
00 = Blanked
01 = Displayed
Returns 1 byte as defined below.
Selects whether the fields digits (for
VITC time windows only) will be
shown on the character inserter
00 = Blanked
01 = Displayed
Returns 1 byte as defined below.
Selects whether the symbols which
identify the Character inserter
windows will be shown
00 = Blanked
01 = Displayed
DESCRIPTION
LTC Reader
VITC Reader
Returns 1 byte as defined below
Selects the mode of the reader.
Page 4-11