Table 3-2: Overview Of The 8010Tm-Irig Engineering Menu - evertz 8010TM IRIG Instruction Manual

VIDEO TYPE
LTC LEVEL
VITC DEL START
VITC DEL END
GEN DATE FORMAT
GEN COLOUR PHASE
JAM WINDOW
REFERENCE MODE
DAYLIGHT SAVING
GPI1 ASSIGNMENT
GPI2 ASSIGNMENT
GPO1 ASSIGNMENT
GPO2 ASSIGNMENT
GPO DURATION
SERIAL BAUD RATE
SERIAL TEST
XRAM TEST
DISPLAY LEVEL
SDI VBLANK END
NTSC SETUP
FONT DOWNLOAD
SOFTWARE VERSION
FACTORY RESET

Table 3-2: Overview of the 8010TM-IRIG Engineering Menu

Table 3-2 shows the items in the main level of the engineering menu tree. Sections 3.7.1 to 3.7.16
provide detailed descriptions of each of the sub menus. The tables in these sections are arranged in
an indented structure to indicate the path taken to reach the control. Menu items or parameters that
are underlined indicate the factory default values.
OPERATION
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
Sets the Video standard for the encoder
Sets the amplitude level of the LTC output
Sets the first line that will be blanked by the VITC deleter
Sets the last line that will be blanked by the VITC deleter
Selects the date encoding format for the generator TIME DATE mode
Sets an offset from the Colour reference input
Sets a Jam sync window for the generator Convert 25 ⇔ 30 mode
Selects the generator framing reference
Sets whether the Generator time will be adjusted for DST or not
Assigns the function for General Purpose Input 1
Assigns the function for General Purpose Input 2
Assigns the function for General Purpose Output 1
Assigns the function for General Purpose Output 2
Sets the duration of the momentary general purpose outputs
Sets the baud rate of the serial port
Turns on a Serial Port output test
Turns on a RAM hardware test
Sets the brightness level of the Front panel display
Sets the last line that will have the SDI V bit set to zero
Selects if Setup will be applied on the optional analog NTSC output.
Used to Download new character fonts
Displays the current firmware version of the encoder
Resets the encoder to its Factory default condition
Revision 1.4.1
Page 3-27