Table of Contents
Advertisement
3.6.7. Special VCG Indicators
The following special indicators are used between the seconds and frames digits of the time window in
the character inserter to identify non drop frame and drop frame code (NTSC only)
Non Drop Frame
Drop Frame (NTSC) Period (.)
The following special indicators are used between the hours and minutes digits of the generator time
window in the character inserter when the generator is in the Time Date mode to identify when the local
time is being adjusted for Daylight Saving Time
DST Time Off
DST Time On
3.6.8. Turning on the SDI Video Bypass Relay
BYPASS MODE
Bypass mode off
Bypass mode on
3.7.
PROGRAMMING THE ENGINEERING SETUP FUNCTIONS
An engineering Setup menu is provided to set up items that are normally required only during
installation.
This menu should be used by advanced users only, as improper use can overwrite
user setups.
To enter the front panel programming menu, press the SHIFT + SETUP keys. The two vertical arrow
keys ( ,
) allow you to move vertically within the engineering menu tree. When you have selected
the desired menu item, press the
selected will be blinking. When you have selected the desired sub menu choice press the SELECT key
to save your choice. When you have made all the desired changes, press the SETUP key to return to
the normal display mode.
OPERATION
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
Colon (:)
Colon (:)
Period (.)
The BYPASS MODE menu item is used to select whether the optional
video bypass relay will be active or not.
manually put the 8010TM-IRIG in Bypass mode. In this mode, the input
video is directly connected to the output, and the encoder will no longer
be active. Alternatively the Bypass relay can be activated by pressing
SHIFT + BYPASS. The Front panel Bypass LED will be On when the
unit is in bypass mode.
Select Bypass mode off to turn off the Bypass relay and process the
incoming video through the SDI Time Code Master.
Select Bypass mode on to activate the optional video bypass relay and
disable the encoder.
key to reveal the choices for that item. The choice that is currently
Revision 1.4.1
This allows the user to
Page 3-26
Advertisement
Table of Contents
