Table 4-10: Reader Modes - evertz 8010TM IRIG Instruction Manual

64 Sense RDR Display
44 Select RDR Display
65 Sense Broadcast Mode
45 Define Broadcast Mode
GT
Each bit represents a variable length block of data that is requested. Time and User Bits are formatted
according to the Select RDR Mode command above. The broadcast data blocks are assembled in the
following order:
66 Sense Reader
Each bit represents a variable length block of data that is requested. Time and data are formatted
according to the Select RDR Mode command above.
assembled in the following order:
SERIAL PROTOCOL
Model 8010TM-IRIG SDI Time Code Master with IRIG Reader Manual
MODE
1
2
3
4

Table 4-10: Reader Modes

Rdr No.
Rdr No. + 1 byte
1 byte
--- VTRU LTRU
LTRT LTRU VTRT
1 byte
--- VTRU LTRU
LTRT LTRU
Revision 1.4.1
DESCRIPTION
TIME UB
TIME DATA
TIME TIME
TIME DATE
DATA DATA
Returns 1 byte as defined below
Selects whether the look ahead
processing will be applied to the
reader display.
00 = Processed
01 = Direct
Returns 1 byte as defined below
Defines a block of data which will be
sent in broadcast mode, and in
response to a Sense Broadcast
Block command.
GU --- VTRT
VTRU GT
Returns Reader data as defined by
the following byte:
--- VTRT
The bits are polled and return blocks are
VTRT VTRU
LTRT
GU
LTRT
Page 4-12