Table of Contents
Advertisement
HD9626DSK Instruction Manual
3.2.
AN OVERVIEW OF THE SETUP MENU SYSTEM
The SETUP menu system uses the 16 digit alphanumeric display and provides a quick, intuitive method
of configuring the Router. The SETUP Menu contains items that pertain to the overall operation of the
router. These items are normally only required to be set up at installation time, and do not pertain to
the day-to-day operation of the unit. Figure 3-2 provides an overview of the Setup menu system.
GENERAL
− Select Standard
− Matte On/Off
− Reference Timing
− Aspect
− Update Code
− Top
− Output Mode
− Bottom
− Network Info
− Serial Control
− COM D
− COM E (net)
− Genlock Status
− Unit Name
− Automation Debug
− M2100 Auto Debug
3.3.
NAVIGATING THE SETUP MENU
To enter the Setup menu, press the SETUP button. This will bring the user to the main Setup menu
where
&
buttons can be used to move up and down the list of available sub-menus. Top level
menu items are shown in UPPERCASE on the display screen. Once you have chosen the desired sub-
menu, press the SELECT button to select the next menu level.
Once in a sub-menu, there may be another menu layer (shown in Title Case), or there may be a list of
parameters to adjust (shown in lower case). If there is another set of menu choices, use the
buttons to select the desired menu item and press the SELECT button. Continue this process until the
bottom of the menu tree is reached and the list of parameters to be adjusted is shown.
To adjust any parameter, use the
parameter. To view the possible values for that item, press the SELECT button. The current value for
that parameter will be shown blinking. Pressing the
possible values for the selected parameter.
selected will NOT be blinking. Once you have reached the desired value, press the SELECT button to
save your selection. The value shown will begin blinking; indicating that it is now the current value. To
move up one level in the menu press the SETUP button.
Other parameters can be selected from that sub-menu by using the
SELECT button. Alternately you can move up one menu level by pressing the SETUP button.
Once all the desired changes have been made, press the SETUP button one or more times until it
returns to the top of the Menu tree and exits the Setup menu.
Each of the menu items, with function explanations, is described in the following sections.
Page 3-4
MATTE
DSK
− Key Type
− Key Gain
− Key Offset
− Key Threshold
Figure 3-2: Overview of the Setup Menu
&
buttons to move up or down the parameter list to the desired
TRANSITION
− Transition Type
− Transition Rate
− Transition Swap
− Transition Pause
&
buttons allows the user to show the
The various parameter values that are not currently
Revision 1.4
PRESET
− Recall Preset
− Store Preset
− Export Preset
− Preset Source
− GPI Setup
− GPO Setup
&
buttons, followed by the
OPERATION
&
Advertisement
Table of Contents
