Table of Contents
Advertisement
3.4.
FRONT PANEL SETUP MENU – MAIN MENU
The Front panel Setup menu is arranged in a layered structure that groups similar configuration items
together. The following section provides a brief description of the first level of menus that appear when
you enter the menu. Selecting one of these items will take you to the next menu level. Sections 3.5 to
3.9 provide detailed descriptions of each of the sub-menus. The tables in these sections are arranged
in an indented structure to indicate the path taken to reach the control. Menu items or parameters that
are underlined indicate the factory default values.
GENERAL
MATTE
DSK
TRANSITION
PRESET
3.5.
GENERAL CONFIGURATION ITEMS
The GENERAL Setup menu is used to set up various items related to the overall operation of the
HD9626DSK such as Video standard, Time settings, Network info, COM port settings and firmware
versions. Table 3-1 shows the items available in the GENERAL Setup menu. Sections 3.5.1 to 3.5.9
provide detailed information about each of the sub-menus.
Select Standard
Reference Timing
Update Code
Output Mode
Network Info
Serial Control
Com D
Com E (net)
Genlock status
Unit Name
Automation Debug
M2100 Auto Debug
OPERATION
This menu is used to set up the video standard, COM ports, network address,
time and other miscellaneous settings, as well as to update firmware.
This menu is used to configure the matte attributes.
This menu is used to configure the DSK functions – key type, gain, and
thresholds.
This menu is used to set up the transition type, rate and the unit's swap mode.
This menu is used to save and recall user presets, and to configure the General
Purpose inputs and outputs.
Sets the video standard
Configures the reference timing of the device
Allows the user to upgrade the devices' firmware
Set the output behaviour of the device
Configures the network settings
Configures the Serial Control port (cannot be modified)
Configures the Com D port
Configures the virtual serial port (Com E)
Displays the status of the genlock
Sets the unit name when used with a M2100 control panel
Debugging tool for the Evertz automation protocol
Debugging tool for the M2100 automation protocol
Table 3-1: Top Level of the General Setup Menu
Revision 1.4
HD9626DSK Instruction Manual
Page 3-5
Advertisement
Table of Contents
