Table of Contents
Advertisement
HD9626DSK Instruction Manual
INPUT A:
The A button selects the video source from the HD SDI INPUT A and puts it on the
Preview Bus.
INPUT B:
The B button selects the video source from the HD SDI INPUT B and puts it on the
Preview Bus.
DSK:
The DSK button will display the background video with the selected FILL video mixed
(based on the selected Key video) on the Preview Bus.
See section 3.7 for information about setting up the DSK MODE and other settings.
3.1.3. The Program Bus Button Group
This group of four buttons are used to select the source to put on the Program Bus. The Program Bus
consists of four sources: Input A, Input B, DSK, and MATTE.
The four buttons on the Program Bus are MUTUALLY EXCLUSIVE. This means if
one is selected, the others are automatically deselected from the Program Bus.
INPUT A:
The A button selects the video source from the HD SDI INPUT A and puts it on the
Program Bus.
INPUT B:
The B button selects the video source from the HD SDI INPUT B and puts it on the
Program Bus.
DSK:
The DSK button will display the background video with the selected FILL video mixed
(based on the selected Key video) on the Program Bus. See section 3.7 for information
about setting up the DSK MODE and other settings.
MATTE:
The MATTE button selects the pre-configured MATTE.
configured in section 3.6. The MATTE is enabled and disabled in both the Preview and
Program outputs.
3.1.4. Setup Button Group
SETUP:
This button is used to enter the Setup menu, which is used to control various setup
options to configure the operating modes of the unit (See section 3.3 for an overview of
the Setup menu.) Once the user is in the Setup menu, this button is also used to back
out of the menu selections to the next higher menu level or to exit the Setup menu and
return to normal panel operation.
SELECT:
When in the Setup menu, this button is used to choose a sub-menu and navigate to the
next level down in the menu structure. Once the user is at the bottom level of the menu
system it is also used to accept numeric values or to make the displayed menu choice
the active value for that menu item.
,
When in the Setup menu, the
the current menu level in the menu system. The
enter numeric values for menu choices at the bottom level of the menu system.
Page 3-2
and
arrow keys are used to move to various items at
and
Revision 1.4
The MATTE function is
arrow keys are also used to
OPERATION
Advertisement
Table of Contents
