Table of Contents
Advertisement
Programming 25 Periods Profile
Programming 25 Periods Profile by Time
Note:
4-32
•
To reprogram a parameter, press NO . The pump
displays the
so you can advance through all the programming
screens by pressing YES and NO and change the
values if desired.
10.
The Final Confirmation screen displays the infusion
rate and amount, alternating with
Press Run
parameters if desired. See "Reviewing Profile
Parameters," 3-17.
11.
When you have reconfirmed the programmed
parameters, press RUN/HOLD to begin the infusion,
or press NO/REVIEW to review parameters.
You must complete steps 1 through 7 of "Program-
ming 25 Periods Profile," 4-28, before performing this
procedure.
To program a 25 Periods profile by time:
The pump displays:
Periods in Time?
Press YES . The pump displays the last time
1.
programmed for the first period stored in memory.
Total Time: HH:MM
Press YES to accept the time, or enter a new time in
2.
hours:minutes format, then press YES to confirm.
The pump displays:
VOLUME: XXXX ml
6060™ Multi–Therapy Pump Operator's Manual
DELAY DELIVERY?
. This lets you reconfirm the infusion
PROGRAM
PERIOD 01
PERIOD 01
screen again
25 PERIODS
07-19-12-353
Advertisement
Table of Contents
