Resuming Delivery of an Interrupted Infusion
Note:
Resuming Delivery of an Interrupted Infusion
Resuming an Interrupted Infusion
5-4
To delay the start of the infusion, press YES and
5.
enter the desired delay time in hours:minutes. Press
YES again to accept the delay time.
If the pump is locked out in PCA, the option to delay
delivery is not available.
If you want to begin infusion immediately, press NO
6.
at the prompt.
If the pump is powered off during an infusion, when
the pump is turned on again you may resume that
infusion where it was interrupted, re-start that
infusion from the beginning, or select or program a
completely different infusion.
When the pump is turned back on after being
interrupted during an infusion, it will display
RESUME? , alternating with the name of the profile
that was interrupted.
To resume an infusion where it left off, press YES at
1.
RESUME?
the
The pump will then display the rate and cumulative
volume infused values at the time the infusion was
interrupted, alternating with the phase of delivery at
the time of interruption (UP-RAMP, PERIOD 4,
etc.).
Press RUN/HOLD to resume the infusion at the
2.
exact point where it was stopped.
6060™ Multi–Therapy Pump Operator's Manual
prompt.
07-19-12-353