Table of Contents
Advertisement
Programming Intermittent Profile
Note:
Interrupting an Intermittent Infusion
4-24
The Final Confirmation screen displays the infusion
20.
rate and amount, alternating with
Press Run
reconfirm the infusion parameters.
21.
When you have reconfirmed the programmed
parameters, press RUN/HOLD to begin the infusion.
Intermittent infusions always begin with a dose period
and end with a KO period unless Delay Delivery is
used.
If the pump is turned off during an Intermittent
infusion, the pump's clock keeps track of the dosing
schedule.
If turned off between scheduled doses, the pump
displays the appropriate Resume? prompt when it is
turned back on.
If turned off during a scheduled dose, the clock
keeps track of the time remaining in the interrupted
dose. The Resume? prompt displayed when the
pump is turned back on varies as shown in Table 4-1.
6060™ Multi–Therapy Pump Operator's Manual
. This gives you the opportunity to
INTERMITTENT
07-19-12-353
Advertisement
Table of Contents
