Table of Contents
Advertisement
Delivery Profile Overview
Note:
Delivery Profile Overview
3-10
The pump will not deliver an infusion that has a zero
value for any of its parameters, except delay delivery
time and Titration rate and volume. If you try to start
an infusion with a zero-value parameter, the pump
displays
RE-PROGRAM
a complete list of the pump's alert messages.
To change the value of a displayed parameter, you
may press
NO
the numeric keys to enter a new value directly over
the displayed value.
You may change the programmed values of an
infusion using the programming screens, or
whenever the pump is displaying the Ready Screen
before the start of an infusion.
You can titrate the flow rate and/or the volume during
delivery of a Continuous or PCA infusion, or before
or after a Continuous infusion.
See "Programming Continuous Profile," 4-1 and
"Programming PCA Infusions," 4-36 for more
information on titrating in these profiles.
The pump offers five primary delivery profiles, to
cover a variety of infusion requirements. The profiles
are Continuous, Auto–Ramp
Periods, and PCA. The parameters for any of these
profiles are fully programmable, offering unlimited
customization of infusion deliveries.
The five profiles differ primarily in their delivery of
infusion rates over time. Descriptions of the five
profiles follow.
6060™ Multi–Therapy Pump Operator's Manual
. See "Alert Messages," 6-6 for
to clear the parameter to zero, or use
®
, Intermittent, 25
07-19-12-353
Advertisement
Table of Contents
