Table of Contents
Advertisement
Programming 25 Periods Profile
Programming 25 Periods Profile
4-28
Press RUN/HOLD to resume the final KO phase of
7.
the previous infusion. When the KO phase is
complete, the pump begins the new program cycle
automatically.
This profile permits programming and infusion of up
to 25 different delivery periods, each with its own
rate and volume, or time and volume. The periods are
then delivered one after the other.
You can program a 25 Periods profile by rate or by
time.
To program a 25 Periods profile:
Power the pump on by pressing ON/OFF PUMP .
1.
The pump executes its self-test, then displays:
YES to Program
RUN to Repeat
Press YES . The pump displays the current
2.
downstream occlusion pressure setting, then
displays:
CONTINUOUS?
Press NO until
3.
Press YES to select 25 Periods profile. The pump
4.
displays:
DELAY DELIVERY?
6060™ Multi–Therapy Pump Operator's Manual
25 Periods?
is displayed.
07-19-12-353
Advertisement
Table of Contents
