Programming Infusions
Repeating a Continuous Infusion
07-19-12-353
To repeat a previously programmed continuous
infusion:
Turn the pump on by pressing ON/OFF PUMP .
1.
The pump executes its self-test, then displays:
YES to Program
RUN to Repeat
To repeat the last program delivered, press RUN .
2.
The display alternates between the last programmed
parameters and:
CONTINUOUS
PRESS RUN
Confirm that the programmed settings are suitable,
3.
then press RUN to start the infusion.
6060™ Multi–Therapy Pump Operator's Manual
4
4-9