Table of Contents
Advertisement
Resuming Delivery of an Interrupted Infusion
Note:
Selecting or Programming a Different Infusion
5-6
Press RUN/HOLD .
3.
The infusion rate and volume are displayed,
alternating with the name of the profile, providing
you with an opportunity to reconfirm the infusion
parameters.
Press RUN/HOLD . The pump displays:
4.
DELAY DELIVERY?
If you want to delay the start of the infusion, press
5.
YES . If not, press NO and the infusion will begin
immediately.
Delay delivery is not available in PCA profile.
6.
If you want to delay delivery, enter the delay time in
hours:minutes and press YES when the desired delay
time is displayed. The pump will count down the
delay time, then automatically begin the infusion.
Programmable Mode
When the pump is turned on after being interrupted
during an infusion, it will display RESUME? ,
alternating with the name of the profile that was
interrupted.
Press NO at the
1.
displays:
YES to Program
RUN to Repeat
Press YES to program a different infusion, or RUN
2.
to select a preprogrammed infusion.
6060™ Multi–Therapy Pump Operator's Manual
RESUME?
prompt. The pump
07-19-12-353
Advertisement
Table of Contents
