Table of Contents
Advertisement
Delivery Options and Advanced Functions
Shortcut Delivery in Lockout Mode
Note:
Note:
07-19-12-353
In Lockout Mode, only the available profiles will be
offered for delivery. If your desired delivery profile is
not listed, you must return to Programmable Mode
and add it to the lockout program. See "Programma-
ble Mode / Lockout Mode," 5-16 for complete infor-
mation.
To start a previously programmed infusion when the
pump is in Lockout Mode:
Press ON/OFF PUMP to turn the pump on. The
1.
pump displays:
YES to Program
RUN to Repeat
Press RUN/HOLD . The pump displays
2.
(profile)
profile programmed or delivered.
Do one of the following:
3.
•
Press RUN/HOLD to deliver the displayed
profile as previously programmed.
•
Press NO repeatedly until the desired profile is
displayed, then press RUN/HOLD to deliver the
chosen profile as previously programmed.
If the pump is locked out in PCA, the previously pro-
grammed PCA infusion cannot be started.
The infusion rate and volume are displayed,
alternating with the name of the profile. This gives
you an opportunity to reconfirm the infusion
parameters.
Press RUN/HOLD . The pump displays:
4.
DELAY DELIVERY?
6060™ Multi–Therapy Pump Operator's Manual
, where profile is the name of the last
READY
5
5-3
Advertisement
Table of Contents
