Figure 26. Air baffle removal
Attention: For proper cooling and airflow, replace the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
Installing the air baffle
Use this information to replace the air baffle.
Read the safety information in "Safety" on page iii and "Installation guidelines" on page 79.
If you are replacing a server component or installing an optional device in the server, you need to take out the
node out from the rack enclosure, turn off the server and peripheral devices, and disconnect all external
cables.
To replace the air baffle, complete the following steps.
Step 1.
Align the air baffle fin in between the DIMM socket latch.
Air baffle
.
Chapter 5
Removing and replacing server components
91