Queuing - Dahua N41C1P User Manual

Step 2 Select a channel and then click Add.
Step 3 Select the Enable checkbox and then set Type to In Area No.
Step 4 Draw people counting rule.
1) Click
2) Configure the parameters.
3) Click OK.
Step 5 Click
Step 6 Click
Step 7 Click Apply.

5.9.11.4 Queuing

Background Information
After configuring queuing alarm, the system can realize the corresponding linkage actions
once the number of people in the queue or the waiting time has triggered an alarm.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > People Counting > Queuing.
Step 2 Select a channel, and then click Add.
Step 3 Select the Enable checkbox.
Step 4 Click
Step 5 Click
Time Alarm.
Step 6 Click
Step 7 Click Apply.
to draw a rule. Right-click the image to stop drawing.
and then enable in-area people number alarm and stay alarm.
under Trigger to configure the alarm schedule and linkage
Figure 5-153 Queuing
to draw queuing rule and area.
under Parameters, and then enable Queue People No. Alarm or Queue
under Trigger to configure alarm schedule and linkage.
188
User's Manual