when the staying period exceeds the defined duration, an alarm is triggered.
Procedure
Select Main Menu > AI > Parameters > People Counting > People Counting.
Step 1
Step 2
Select a channel, and then click Add.
Step 3
Select the Enable checkbox, and then set Type to In Area No.
Step 4
Draw people counting rule.
1) Click
2) Configure the parameters.
3) Click OK.
Step 5
Click
Step 6
Click
linkage, see Table 5-50.
Click Apply.
Step 7
5.9.12.4 Configuring Queuing
After configuring queuing alarm, the system can realize the corresponding linkage actions once the
number of people in the queue or the waiting time has triggered an alarm.
Procedure
Step 1
Select Main Menu > AI > Parameters > People Counting > Queuing.
Figure 5-178 People counting
to draw a rule. Right-click the image to stop drawing.
and then enable in-area people number alarm and stay alarm.
under Trigger to configure the alarm schedule and linkage. For details on alarm
287
User's Manual