Table of Contents
Advertisement
Local signal: Display local signal source. For specific configurations, refer to "4.5.4.2 Local
Signal."
Network signal: Display signal source of the added device in "Remote Device". For specific
adding methods, refer to "4.5.4.1 Network Signal."
4.4.2.2 Custom
You can customize signal group. Custom tab displays added group and signal source. You can
drag signal group to the window for loop play of signals in the group. See "4.5.4.3 Signal
Group."
4.4.2.3 Image Preview
Add signal to preview window, so you can preview the video in preview window.
Step 1
Select a preview window.
Step 2
Select signal source in Device or Custom, and click the signal source to preview
image in the corresponding window.
4.4.3 PTZ Control Panel
PTZ control is used to adjust the direction of the PTZ device, carry out scan, preset point, point
tour, pattern and other settings. See Figure 4-37 and Table 4-7. For details, see "4.3.4.9.1 PTZ
Control."
To control PTZ with local serial port, configure parameters, and ensure correct wiring. See
"4.5.1.8 PTZ Setup."
Web Operation 60
Advertisement
Table of Contents
