Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 257

3. If the machine is not started normally, execute key operation to shift to the service mode for shifting to hard disk
maintenance mode.
4. Determine if the issue is solved in the hard disk maintenance mode.
• Proceed to 5 for diagnosis for the first time or trying to restore with the hard disk maintenance mode.
• If the issue cannot be solved by hard disk maintenance (HD-CHECK/HD-CLEAR is not executed or issue unsolved
even executed), proceed to 9.
5. Press "1" of Numeric Keypad, then two digits number to specify the target area (CHK TYPE).
CAUTION:
The CHK - TYPE to be specified needs to be entered in two digits even the number to be specified is one digit. Enter "01"
to specify "1" and enter "04" to specify "4".
For example, in the case of the above display (E602-0801), specify No. 8 because Partition No. 8 is in error. (Enter the
number as "08")
If you made a mistake, press "1" again then enter two digits number.
6. Specify and schedule the process stated as a remedy for error code by referring to the Flow chart No.6, "Error /
Jam / Alarm" in the Service Manual. Then turn OFF and then ON the main power of the machine.
• To schedule disk check (COPIER > FUNCTION > SYSTEM >HD-CHECK), select [2]:HD-CHECK.
• To schedule formatting (COPIER / FUNCTION / SYSTEM /HD-CLEAR), select [3]:HD CLEAR.
NOTE:
When the menu [2] to [4] is selected, key cannot be re-entered. If you made a wrong selection, Turn OFF and then ON the main
power of the machine, shift to hard disk maintenance mode and specify again.
7. Scheduled process is automatically executed.
8. If the process is complete and the machine is restarted normally, analysis is complete.
The same black screen and the error code is displayed, shift back to the hard disk maintenance mode and conduct other
maintenance.
[1] : CHK TYPE
[2] : HD CHECK
[3] : HD CLEAR
[4] : HD OPERATION CANCEL
+------------------------------------+
| E602-0801
+------------------------------------+
Cannot access the hard disk.
If the optional removable hard disk is use, check it is connected
then restart the machine.
IF this is error tou occur, content your service representative.
Example of hard disk maintenance mode screen
[1] : CHK TYPE
[2] : HD CHECK
[3] : HD CLEAR
[4] : HD OPERATION CANCEL
-------------------------------------------------
[1] has been selected
- Change to (0)
246
|
6. Troubleshooting