Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 570

COPIER (Service mode for printer) > OPTION (Specification setting mode) > LCNS-TR
ST-SCPDF 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-SCPDF 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
ST-AMS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-AMS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-ERDS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Install state dspl of Trace & Smooth PDF
To display installation state of Trace & Smooth PDF when disabling and then transferring the
license.
When checking whether Trace & Smooth PDF is installed
1) Select ST-SCPDF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-SCPDF.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl of Trace & Smooth PDF
To display transfer license key to use Trace & Smooth PDF when disabling and then transferring
the license.
- When replacing HDD
- When replacing the device
1) Select ST-SCPDF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-SCPDF.
This mode is enabled when SEND function is installed.
24 digits
Install state dspl of Access Mngm System
To display installation state of Access Management System when disabling and then transferring
the license.
When checking whether Access Management System is installed
1) Select ST-AMS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-AMS.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl of Access Mngm System
To display transfer license key to use Access Management System when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-AMS.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-AMS.
24 digits
Install state dspl: E-RDS 3rd Pty Expnsn
To display installation state of monitoring service function when disabling and then transferring the
license.
When checking whether E-RDS non-Canon-made extension function is installed
1) Select ST-ERDS.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-ERDS.
When operation finished normally: OK!
According to the setting at shipment
Monitoring service function: A function to send charge counter to the non-Canon-made charge
server.
559
8. Service Mode