Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 500

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > SYSTEM
DSRAMBUP 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
DSRAMRES 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
RSRAMBUP 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
RSRAMRES 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
R-REBOOT 1
Detail
Use Case
Adj/Set/Operate Method
Backup of DC Controller PCB SRAM
To back up the setting data in SRAM of the DC Controller PCB.
When replacing the DC Controller PCB for troubleshooting at the time of trouble occurrence
Select the item, and then press OK key.
During operation, the setting data changes by manual or automatic adjustment. When backup data
which has been left for a long period of time is restored, it is overwritten with new setting data and
the old data is deleted.
COPIER> FUNCTION> SYSTEM> DSRAMRES
Restore of DC Controller PCB SRAM
To restore the setting data which has been backed up in SRAM of the DC Controller PCB.
When replacing the DC Controller PCB for troubleshooting at the time of trouble occurrence
Select the item, and then press OK key.
During operation, the setting data changes by manual or automatic adjustment. When backup data
which has been left for a long period of time is restored, it is overwritten with new setting data and
the old data is deleted.
COPIER> FUNCTION> SYSTEM> DSRAMBUP
Backup of Reader-related setting data
To back up the Reader-related setting data retained in the SATA Flash PCB on the Main Controller
PCB.
When replacing the Main Controller PCB/clearing the Reader-related RAM data/replacing the
SATA Flash PCB
Select the item, and then press OK key.
During operation, the setting data changes by manual or automatic adjustment. When backup data
which has been left for a long period of time is restored, it is overwritten with new setting data and
the old data is deleted.
COPIER> FUNCTION> SYSTEM> RSRAMRES
Restoration of Reader-related set data
To restore the Reader-related setting data which has been backed up to the SATA Flash PCB on
the Main Controller PCB.
When replacing the Main Controller PCB/clearing the Reader-related RAM data/replacing the
SATA Flash PCB
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
During operation, the setting data changes by manual or automatic adjustment. When backup data
which has been left for a long period of time is restored, it is overwritten with new setting data and
the old data is deleted.
COPIER> FUNCTION> SYSTEM> RSRAMBUP
Reboot of host machine (Remote)
To reboot the host machine.
When the reboot is carried out with the remote control by VNC
Select the item, and then press OK key.
489
8. Service Mode