Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 485

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > INSTALL
CDS-CTL
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
RDSHDPOS
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Required Time
Related Service Mode
Supplement/Memo
BIT-SVC
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
NFC-USE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
1 Set country/area when using CDS
To set country/region to enable CDS.
In principle, the default value is the same as that of CONFIG. If the value differs from the country/
region of the vice-company of sales, change the setting.
When enabling CDS
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
If the setting value is not configured to be the same as the country/region of the vice-company of
sales, the necessary firmware may not be able to be downloaded.
JP: Japan, US: USA, GB: Great Britain, FR: France, DE: Germany, IT: Italy, AU: Australia, SG:
Singapore, NL: Netherlands, KR: Korea, CN: China, TW: Taiwan, ES: Spain, SE: Sweden, PT:
Portugal, NO: Norway, DK: Denmark, FI: Finland, PL: Poland, HU: Hungary, CZ: Czech Republic,
SI: Slovenia, GR: Greece, EE: Estonia, RU: Russia, SK: Slovakia, RO: Romania, HR: Croatia, BG:
Bulgaria, TR: Turkey, TH: Thailand, VN: Vietnam, AR: Argentina, IN: India, CA: Canada, LA: Latin
America, HK: Hong Kong
It differs according to the location.
COPIER> OPTION> FNC-SW> CONFIG
CDS: Contents Delivery System
1 Auto adj of Reader shading position
To automatically adjust the Scanner Unit (Front) position in feed direction when reading the White
Plate on the left edge of the Copyboard Glass.
The adjustment result is reflected to ADJ-S.
When replacing the Scanner Unit (Front)
Select the item, and then press OK key.
At start of operation: START, During operation: ACTIVE, When operation finished normally: OK!
10 sec
COPIER> ADJUST> ADJ-XY> ADJ-S
Shading: It determines the white color reference by reading the White Plate.
1 OFF/ON of Web service of E-RDS
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of Web service function of E-RDS.
When OFF is selected, authentication information cannot be obtained from E-RDS.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
1 ON/OFF of NFC option
To set whether to enable the installed NFC option.
Set 1 when using the NFC option. [Use NFC Card Emulation] is displayed in [Settings/Registration].
When installing the NFC option
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Management Settings> Device Management> Use NFC Card Emulation
474
8. Service Mode