Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 428

■ USER
COPIER (Service mode for printer) > DISPLAY (State display mode) > USER
SPDTYPE
Detail
Use Case
Adj/Set/Operate Method
ADFTYPE
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
SER-NAME
Detail
Use Case
Adj/Set/Operate Method
■ ACC-STS
COPIER (Service mode for printer) > DISPLAY (State display mode) > ACC-STS
FEEDER
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
SORTER
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
DECK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
1 Display of engine speed type
To display the engine speed type of this machine.
When checking the engine speed type
N/A (Display only)
1 Display of DADF type
To display the type of the DADF currently installed.
When replacing the DADF
N/A (Display only)
0 to 2
0: Reverse type, 1: 1-path type, 2: Not installed (Copyboard model)
COPIER> OPTION> CUSTOM> SCANTYPE
1 Dspl firmware registration series name
Display firmware registration series name
To check the folder name for firmware registration in USB flash drive
N/A (Display only)
1 Display of DADF connection state
To display the connecting state of DADF.
When checking the connection between the machine and DADF
N/A (Display only)
0 to 1
0: Not connected, 1: Connected
1 Connect state of Finisher-related option
To display the connection state of Finisher-related options.
When checking the connection of Finisher-related options
N/A (Display only)
Left column (connection state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle, without Folding Unit
3: With Saddle and Inserter, without Folding Unit
4: With Saddle and Folding Unit, without Inserter
5: With Saddle, Inserter and Folding Unit
Right column (connection state of Finisher-belonged Puncher): 0 to 4
0: No hole, 1: 2-hole, 2/4-hole switching, 2: 3-hole, 2/3-hole, 2/3-hole switching, 3: 4-hole, 4: 4-
hole (SW)
1 Display of Paper Deck connection state
To display the connecting state of the Paper Deck.
When checking the connection between the machine and the Paper Decks
N/A (Display only)
0 to 5
0: Not connected, 1: Connected, 2 to 4: Not used, 5: Multi-purpose Tray only
417
8. Service Mode