Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 515

COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
UI-SBOX 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
UI-MEM 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
UI-NAVI 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SDTM-DSP 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
ON/OFF of Advanced Box screen display
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of the Advanced Box screen on the Control Panel.
The setting values 0 (OFF) and 1 (ON) are linked with OFF and ON of [Advanced Box/Network]
in [Settings/Registration] respectively. The setting is reflected after turning OFF/ON the power.
When not displaying the Advanced Box screen on the Control Panel
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
It differs according to the location.
Preferences> Display Settings> Store Location Display Settings> Advanced Box/Network
ON/OFF of memory media screen display
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of the memory media screen display on the Control Panel.
The setting values 0 (OFF) and 1 (ON) are linked with OFF and ON of [Memory Media] in [Settings/
Registration] respectively. The setting is reflected after turning OFF/ON the power.
When not displaying the memory media screen on the Control Panel
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
Preferences> Display Settings> Store Location Display Settings> Memory Media
ON/OFF of Tutorial display
To set whether to display or hide "Introduction to Useful Features" in the main menu.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
1
ON/OFF of auto shutdown shift time dspl
To set whether to display [Auto Shutdown Time] in [Settings/Registration].
Upon user's request
Enter the setting value, and then press OK key.
When 0 is set, automatic shutdown is not executed.
0 to 1
0: OFF, 1: ON
It differs according to the location.
Preferences> Timer/Energy Settings> Auto Shutdown Time
504
8. Service Mode