Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 506

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
CDS-FIRM 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
CDS-MEAP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
CDS-UGW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Set to allow firmware update by admin
* Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow the user (administrator) to perform firmware update linked with CDS and
collection of log files.
When 1 is set, [Distribution Update] is added to remote UI, and [Firmware Update] is added to
[Register/Update Software] of local UI. Log files can be collected from remote UI.
When allowing the administrator to update the firmware
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not use it for purposes other than collecting log files.
Be sure to return the value to 0 after use.
0 to 1
0: Disabled, 1: Enabled
It differs according to the location.
COPIER> OPTION> FNC-SW> LCDSFLG
Management Settings> License/Other> Register/Update Software
CDS: Contents Delivery System
Set to allow MEAP installation by admin
* Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to allow the user (administrator) to install MEAP applications from CDS and enable
iR options.
When 1 is set, Updater can be activated from [Settings/Registration].
When allowing the administrator to install MEAP applications and enable iR options from CDS
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
1
CDS: Contents Delivery System
Set to allow firmware update from Server
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit update of the firmware from the Remote Monitoring Server.
When "1: Enabled" is set, Updater accepts the operation from the Remote Monitoring Server in
cooperation with CDS.
When allowing update of the firmware from the Remote Monitoring Server
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
It differs according to the location.
CDS: Contents Delivery System
495
8. Service Mode