Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 578
Hide thumbs
Also See for imageRUNNER ADVANCE 715iF III Series:
- Faq manual (92 pages) ,
- Getting started (12 pages)
Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > LCNS-TR
ST-OPFNT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-OPFNT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-NCAPT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-NCAPT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-IPFAX
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Install state display of PCL Font Set
To display installation state of PCL Font Set when disabling and then transferring the license.
When checking whether PCL Font Set is installed
1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-OPFNT.
When operation finished normally: OK!
According to the setting at shipment
Trns license key display of PCL Font Set
To display transfer license key to use the PCL Font Set when disabling and then transferring the
license.
- When replacing HDD
- When replacing the device
1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-OPFNT.
24 digits
Install state display of NetCap function
To display installation state of network packet capture function when disabling and then
transferring the license.
When checking whether network packet capture function is installed
1) Select ST-NCAPT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-NCAPT.
When operation finished normally: OK!
0
Transfer license key dspl of NetCap func
To display transfer license key to use the network packet capture function when disabling and then
transferring the license.
- When replacing HDD
- When replacing the device
1) Select ST-NCAPT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-NCAPT.
24 digits
Installation state display of IPFAX
To display installation state of IPFAX when disabling and then transferring the license.
When checking whether IPFAX is installed
1) Select ST-IPFAX.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-IPFAX.
When operation finished normally: OK!
According to the setting at shipment
567
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
