Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 491

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > PART-CHK
SL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
SL-ON 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
■ CLEAR
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR
ERR 1
Detail
Use Case
Adj/Set/Operate Method
R-CON 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
JAM-HIST 1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
ERR-HIST 1
Detail
Use Case
Adj/Set/Operate Method
Related Service Mode
Specification of operation solenoid
To specify the solenoid to operate.
When replacing the solenoid/checking the operation
Enter the value, and then press OK key.
0 to 5
0: Multi-purpose Tray Pickup Solenoid (SL1)
1: Cassette 1 Pickup Clutch (CL3)
2: Option Cassette 2 Pickup Clutch (CL601/CL15/CL5)
3: Option Cassette 3 Pickup Clutch (CL601/CL7)
4: Option Cassette 4 Pickup Clutch (CL601)
5: Not used
0
COPIER> FUNCTION> PART-CHK> SL-ON
Operation check of Solenoid
To start operation check for the Solenoid specified by SL.
The operation automatically stops after operation of 10 seconds.
When replacing the Solenoid/checking the operation
Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> PART-CHK> SL
Clear of error code
To clear the specific error code.
At error occurrence
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Clearing of Reader-related setting data
To clear the Reader-related setting data.
When clearing the Reader-related setting data
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
- Output the service mode setting values by P-PRINT before execution. After execution, enter
necessary setting values.
- The RAM data is cleared after the main power switch is turned OFF/ON.
COPIER> FUNCTION> MISC-P> P-PRINT
Clear of jam history
To clear the jam history.
When clearing the jam history
Select the item, and then press OK key.
COPIER> DISPLAY> JAM
Clear of error code history
To clear the error code history.
When clearing the error code history
Select the item, and then press OK key.
COPIER> DISPLAY> ERR
480
8. Service Mode