I/O - Canon imageRUNNER ADVANCE 715iF III Series Service Manual

COPIER (Service mode for printer) > DISPLAY (State display mode) > CCD
TARGET-R
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Appropriate Target Value
■ MISC
COPIER (Service mode for printer) > DISPLAY (State display mode) > MISC
TNRB-IDK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
SD-INFO
STC-REC
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value

I/O

For Platform version 3.3 and later, this item is for R&D use only and not for actual use.
The I/O information can be found in service mode > SITUATION > Sensor Check.
2 Shading target value (R)
To display the shading target value of Red.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- At scanned image failure
N/A (Display only)
0 to 2047
512 - 2047
1 Display of Bk-color Toner Container ID
To display the ID of Bk-color Toner Container that is installed to the machine
When checking whether the barcode ID on the Toner Container is read correctly
N/A (Display only)
28-digit decimal number
2 For R&D
1 Check High Consumption Alarm Send Status
To express whether High Consumption Alarm is sent or not with 0 and 1.
- When checking whether High Consumption Alarm is sent or not
Display only
The value returns to 0 only in the following cases:
- When performing COPIER > FUNCTION > CLEAR > CNT-DCON
- When performing "Initialize All Data/Settings"
- When the DC Controller is replaced
0 to 1
0: Transmission disabled, 1: Transmission enabled
1st column: Toner (Y)
2nd column: Toner (M)
3rd column: Toner (C)
4th column: Toner (K)
5th column: Waste Toner Container
6th column: Fixing Web
7th to 8th column: Spare
0
420
8. Service Mode