Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 590

COPIER (Service mode for printer) > OPTION (Specification setting mode) > PM-DLV-D
TR-ROLL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
FX-UNIT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C1-FD-RL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C1-SP-RL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C2-FD-RL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C2-SP-RL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set Transfer Roller prior alm notice tmg
To set the number of days left before the prior notification alarm will be notified.
When changing the timing to notify the prior notification alarm
Enter the setting value, and then press OK key.
-1 to 365
-1: The alarm not issued
It differs according to the location.
Set Fixing Assembly prior alm notice tmg
To set the number of days left before the prior notification alarm will be notified.
When changing the timing to notify the prior notification alarm
Enter the setting value, and then press OK key.
-1 to 365
-1: The alarm not issued
It differs according to the location.
Set CST1 Feed Roller prior alarm ntc tmg
To set the number of days left before the prior notification alarm will be notified.
When changing the timing to notify the prior notification alarm
Enter the setting value, and then press OK key.
-1 to 365
-1: The alarm not issued
It differs according to the location.
Set CST1 Sprtn Roller prior alm ntc tmg
To set the number of days left before the prior notification alarm will be notified.
When changing the timing to notify the prior notification alarm
Enter the setting value, and then press OK key.
-1 to 365
-1: The alarm not issued
It differs according to the location.
Set CST2 Feed Roller prior alarm ntc tmg
To set the number of days left before the prior notification alarm will be notified.
When changing the timing to notify the prior notification alarm
Enter the setting value, and then press OK key.
-1 to 365
-1: The alarm not issued
It differs according to the location.
Set CST2 Sprtn Roller prior alm ntc tmg
To set the number of days left before the prior notification alarm will be notified.
When changing the timing to notify the prior notification alarm
Enter the setting value, and then press OK key.
-1 to 365
-1: The alarm not issued
It differs according to the location.
579
8. Service Mode