Qazt-5302Ds Network Firefighters' Telephone Selector Panel - Mircom FleXNet FNC-2000 Installation And Operation Manual

QAZT-5302DS Network Firefighters' Telephone Selector Panel

Figure 81: QAZT-5302DS Network Firefighters' Telephone Selector Panel
Each QAZT-5302DS annunciates and
controls up to 24 telephone zones. There
is one button and two LEDs per zone.
The lower amber LED indicates zone
trouble. The upper green LED indicates
whether that zone is selected for
telephone communication.
Telephone zone selection buttons toggle
ON and OFF telephone communication
for that zone.
Note: Use configurator to set up the QAZT-5302DS Telephone Zone Selector Panels.
QAZT-5302DS Network Firefighters' Telephone Selector Panel
Connect the first QAZT-5302DS Network Firefighters' Telephone Selector panel to the master telephone by
connecting P1 cable into P2 on the QMT-5302N Master Telephone. P2 of the QAZT-5302DS is connected to P1 of
the next display panel (up to six total).
Figure 82: QAZT-5302DS Telephone Selector Board
P1 CONNECTS TO P2 OF THE QMT-5302N NETWORK MASTER TELEPHONE CONTROL MODULE
Note: All modules such as QMP-5101N/NV Network Master Paging Control Module, the QMT-5302N/NV
Network Master Firefighters' Telephone Control Module, the IPS-2424DS display module and the
paging or telephone selector panel QAZT-5302DS are daisy chained together starting from the FX-
2000N LCD display module, DSPL-420, DSPL-2440, RAXN-LCD or RAXN-LCDG. Total number of
boards allowed in the daisy chain connection is 6 (12 frames).
116
CONNECTION TO NEXT DISPLAY PANEL
P2
QAZT-5302 ADDRESSABLE
TELEPHONE SELECTOR PANEL
P1
Telephone
Telephone
Telephone
#5
#1
Telephone
Telephone
Telephone
#6
#2
Telephone
Telephone
Telephone
#7
#3
Telephone Telephone
Telephone
#8
#4
Telephone Telephone
#13 #17
#9
Telephone Telephone
#10 #14 #18
Telephone
Telephone
#11 #15
#19
Telephone Telephone
#12 #16 #20
Telephone
#21
Telephone
#22
Telephone
#23
Telephone
#24