Rockwell Automation Allen-Bradley ArmorBlock 1732E-IB8M8SOER User Manual page 31

2. Select the hardware address of the device you want to configure.
The New Entry dialog appears showing the device's Ethernet
Address (MAC).
3. Enter the IP Address you want to assign to the device and click OK.
The device is added to the Relation List, displaying the Ethernet Address
(MAC) and corresponding IP Address, Hostname and Description (if
applicable).
When the IP address assignment is made, the address displays in the IP
Address column in the Request History section.
4. To assign this configuration to the device, highlight the device in the
Relation List panel and click Disable BOOTP/DHCP. When power is
Rockwell Automation Publication 1732E-UM003D-EN-E - November 2021
Chapter 5 Configure the Module for Your EtherNet/IP Network
31