Table of Contents
Advertisement
Chapter 5
Configure the Module for Your EtherNet/IP Network
32
cycled to the device, it uses the configuration you assigned and does not
issue a DHCP request.
To enable DHCP for a device that has had DHCP disabled, highlight the device in the
Relation List and click Enable DHCP. You must have an entry for the device in the
Relation List panel to re-enable DHCP.
Save the Relation List
You can save the Relation List to use later. To save the Relation List do the
following:
1. Select Save As... from the File menu.
The Save As dialog box appears.
2. Select the folder you want to save the list to.
Rockwell Automation Publication 1732E-UM003D-EN-E - November 2021
Advertisement
Table of Contents
