Table of Contents
Advertisement
7. Click Save.
8. Optional: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
9. Set arming schedule. See Set Arming Schedule .
10. Set linkage method. See Linkage Method Settings .
7.2.8 Set Unattended Baggage Detection
Unattended baggage detection is used to detect the objects left over in the predefined area.
Linkage methods are triggered after the object is left and stays in the area for a set time period.
Before You Start
Go to VCA → Select Application to select Smart Event, and click Next to enable the function.
Steps
1. Go to VCA → Set Application → Smart Event → Unattended Baggage Detection .
2. Check Enable.
3. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action
during configuration.
Normally, the PTZ control is automatically locked when you enter the configuration interface.
You can manually resume the lock when the countdown is over.
4. Adjust the live image to the desired scene by using PTZ control buttons.
Network Speed Dome User Manual
Figure 7-7 Draw Area
59
Advertisement
Table of Contents
