Table of Contents
Advertisement
Server Certificate/Client Certificate
Note
The device has default self-signed server/client certificate installed. The certificate ID is default.
Create and Install Self-signed Certificate
Steps
1. Go to Maintenance and Security → Security → Certificate Management .
2. Click Create Self-signed Certificate.
3. Input certificate information.
Note
The input certificate ID cannot be the same as the existing ones.
4. Click Save to save and install the certificate.
The created certificate is displayed in the Server/Client Certificate list.
If the certificate is used by certain functions, the function name is shown in the column
Functions.
5. Optional: Click Property to see the certificate details.
Install Self-signed Request Certificate
You can send the self-signed certificate to a trusted third-party for the signature, and install the
certificate to the device.
Before You Start
Create a self-signed certificate first. See Create and Install Self-signed Certificate for instructions.
Steps
1. Go to Maintenance and Security → Security → Certificate Management .
2. Select a self-signed certificate from the Server/Client Certificate list.
3. Click Create Certificate Request.
4. Input request information.
5. Click Save.
The certificate request details are displayed in a pop-up window.
6. Copy the request content and save it as a request file.
7. Send the file to a trusted-third party for signature.
8. After receiving the certificated sent back from the third-party, install it to the device.
1) Click Import.
2) Input Certificate ID.
Network Speed Dome User Manual
90
Advertisement
Table of Contents
