Table of Contents
Advertisement
Encryption Type
AES and TKIP are selectable.
Password
The password for wireless connection via the device AP. The default password is the nine-digit
serial number of the camera. Please change the default password and set a strong password
after logging in for the first time.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum
of 8 characters, including upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you reset
your password regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
4. Click Save.
Note
The function may vary according to different device models.
What to do next
You can connect your mobile phone or PC to the AP.
9.20.2 Access to Device via AP
You can access to the device via the device AP when the device cannot connect to the network.
Steps
1. Go to Configuration → Network → Advanced Settings → WLAN AP to enable WLAN AP
function.
For certain device models, the WLAN AP function is automatically turned on for 5 minutes after
the device is cold booted (by turning the switch on the device to ON), after which the WLAN AP
function is turned off if the device's 4G communication is normal, and remains on if the device's
4G communication is abnormal.
2. Search the device WLAN AP in the WLAN list of your phone or PC.
3. Enter the password and connect your mobile phone or PC to the AP.
Note
The AP name is SSID ("Hik-Serial Number" by default). The password is serial number by default.
The serial number can be obtained from Configuration → System → System Settings → Basic
Information .
4. Enter the IP address in the browser.
Network Speed Dome User Manual
80
Advertisement
Table of Contents
