Table of Contents
Advertisement
Steps
1. Go to Configuration → Event → Alarm Setting → Audible Alarm Output .
2. Select Sound Type and set related parameters.
- Select Prompt and set the alarm times you need.
- Select Warning and its contents. Set the alarm times you need.
- Select Custom Audio. You can select a custom audio file from the drop-down list. If no file is
available, you can click Set → Add to upload an audio file that meets the requirement. Up to
three audio files can be uploaded.
3. Optional: Click Test to play the selected audio file on the device.
4. Set arming schedule for audible alarm. See Set Arming Schedule for details.
5. Click Save.
Note
The function is only supported by certain device models.
Set Alarm Server
Steps
1. Go to Configuration → Event → Alarm Setting → Alarm Server .
2. Enter Destination IP or Host Name, URL, and Port.
3. Select Protocol.
Note
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data
transmission during communication.
4. Click Test to check if the IP or host is available.
5. Click Save.
Network Speed Dome User Manual
65
Advertisement
Table of Contents
