Table of Contents
Advertisement
8. Click Save.
9. Repeat above steps to set other regions.
10. Set arming schedule. See Set Arming Schedule .
11. Set linkage method. See Linkage Method Settings .
8.2.6 Set Unattended Baggage Detection
Unattended baggage detection is used to detect the objects left over in the predefined area.
Linkage methods are triggered after the object is left and stays in the area for a set time period.
Steps
1. Go to VCA → Smart Event → Unattended Baggage Detection .
2. Check Enable.
3. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action
during configuration.
Normally, the PTZ control is automatically locked when you enter the configuration interface.
You can manually resume the lock when the countdown is over.
4. Adjust the live image to the desired scene by using PTZ control buttons.
5. Draw detection area.
1) Select a Region No.. Up to 4 regions can be set.
2) Click Detection Area.
3) Click on the live image to draw the boundaries of the detection area, and right click to
complete drawing.
Stitched PanoVu Camera with PTZ User Manual
Figure 8-8 Draw Area
68
Advertisement
Table of Contents
